FLS-CH10激光測距儀瑞士迪瑪斯 FLS-C基本參數: 激光測距傳感器的測量距離可達500米,典型精度高達1毫米,zui高側量頻率高達200Hz。其自帶的內部加熱器可使傳感器在-40℃以?xún)?nèi)的低溫環境中正常工作。堅固的鋁合金外殼,使防護等級達到IP65可在各種復雜的工業現場及戶外使用。 特點:FLS-CH10激光測距儀 ·測量范圍0.05到500米 ·1.0毫米的精度 ·200赫茲測量頻率 ·串行接口(RS232和RS422) ·高精度模擬輸出(0.1%) ·兩個可編程數字輸出 ·數字輸出誤差信號作用 ·現場總線接口(可選) ·SSI接口 ·d接頭連接器和螺絲終端方便連接 ·固體金屬外殼IP65 ·寬溫度范圍:-40…+ 50°C FLS-CH10激光測距儀選購指南 產品參數:FLS-CH10激光測距儀 | Design conditions | | | | | | | | | | | | | | | | Standard: | -10 ... +50 °C | | • | • | • | | | • | • | | | | | | with heater: | -40 ... +50 °C | | | | | • | • | | | • | • | | | | | | | | | | | | | | | | | | Specifications | | | | | | | | | | | | | | | | Max measuring distance on natural surfaces | m | | 30 | 65 | 65 | 65 | 65 | 65 | 65 | 65 | 65 | | | | Max measuring range on reflective foil | m | | - | 150 | 150 | 150 | 150 | 500 | 500 | 500 | 500 | | | | typical accuracy @2σ | ± mm | | 3 | <3 | <1.5 | <3 | <1.5 | <3 | <1 | <3 | <1 | | | | Repeatability typ. | ± mm | | <1.5 | <0.5 | <0.4 | <0.5 | <0.4 | <0.5 | <0.3 | <0.5 | <0.3 | | | | max measuring rate in Hz | Hz | | 3 | 6 | 6 | 6 | 6 | 200* | 200* | 200* | 200* | | | | Housing IP65 | | | • | • | • | • | • | • | • | • | • | | | | Power Supply | 24 … 30 VDC | | • | | | • | • | | | • | • | | | | | 9 … 30 VDC | | | • | • | | | • | • | | | | | | Laser | red visible | | • | • | • | • | • | • | • | • | • | | | | | | | | | | | | | | | | | | | | | Diameter laser dot | | | | | | | | | | | | | | | – at 10 m | 8 mm | | • | • | • | • | • | • | • | • | • | | | | – at 50 m | 25 mm | | • | • | • | • | • | • | • | • | • | | | | – at 100 m | 40 mm | | | • | • | • | • | • | • | • | • | | | | Dimensions | 106 x 62 x 45 mm | | • | | | | | | | | | | | | | | | 150 x 80 x 55 mm | | | • | • | • | • | • | • | • | • | | | | Weight | g | | 280 | 690 | 690 | 720 | 720 | 690 | 690 | 720 | 720 | | | | | | | | | | | | | | | | | | | | Interfaces | | | | | | | | | | | | | | | | Analog output programmable | 0/4 … 20 mA | | • | • | • | • | • | • | • | • | • | | | | max. error analog output | ±% progr. span | | 0.3 | 0.2 | 0.2 | 0.2 | 0.2 | 0.1 | 0.1 | 0.1 | 0.1 | | | | 2 Digital outputs programmable | Open Drain | | | • | • | • | • | • | • | • | • | | | | 1 Digital output error display | Open Drain | | | • | • | • | • | • | • | • | • | | | | 1 Digital input (programmable instead of DO1) | | | | • | • | • | • | • | • | • | • | | | | RS-232 serial | | | | • | • | • | • | • | • | • | • | | | | RS-422 seral | | | | • | • | • | • | • | • | • | • | | | | ID-Switch 0 … 9 | | | | • | • | • | • | • | • | • | • | | | | Profibus ( extern ) | | | | • | • | • | • | • | • | • | • | | | | SSI | | | | | | | | • | • | • | • | | | | | | | | | | | | | | | | | | | | Connection | | | | | | | | | | | | | | | 5 pin M12 Connector | | | • | | | | | | | | | | | | 15 pin D-Sub Connector | | | | • | • | • | • | • | • | • | • | | | | Internal screw terminal | | | | • | • | • | • | • | • | • | • | | | | | | | | | | | | | | | | | | | | Features | | | | | | | | | | | | | | | Auto start | | | • | • | • | • | • | • | • | • | • | | | | Direct connectivity of an external remote display | | | | • | • | • | • | • | • | • | • | | | | External trigger for measurements | | | | • | • | • | • | • | • | • | • | | | | Synchronized measuring of several devices | | | | • | • | • | • | • | • | • | • | | | | | | | | | | | | | | | | | | | | * | Valid for software version > 5.00 (depending on configuration) | | | | | | | | | | | | | |